TiBolt EnerGel Tip Kit

Gel ink fans, this one's for you.
A new titanium tip that lets your full sized TiBolt run the Pentel EnerGel refill!

Limit 2 per customer.

Heads up: the EnerGel refill has to be trimmed to fit the TiBolt. Everything you need to do that is included in the kit.

TiCkler owners, you're covered too! This batch includes plugs and an aluminum bushing so the tip also works in a TiCkler. (Not pictured yet.)

EnerGel is smooth, dark, and quick drying, so no smudges, and it's a big favorite with lefties.
Pick your line width: 0.5mm for fine, crisp writing, or 0.7mm for a bolder line.

What you get:

• New titanium tip, tumbled finish
• Spring
• Pentel EnerGel refill, 0.5mm or 0.7mm (your choice)
• Adjustable trimming tool
• Single edged razor blade
• Plugs and an aluminum bushing for TiCkler use

TiBolt install:
Unscrew the old tip and pull out the old ink.
Use the trimming tool and razor blade to trim the EnerGel refill to length.
Drop in the refill, put the spring on it, and screw on the new tip.
That's it.

TiCkler install:
The TiCkler takes a different refill length, and the trimming tool is designed to cut that too.
Remove the mechanism from the pen.
Push out the old bushing and press in the new aluminum bushing.
Trim the EnerGel refill to TiCkler length and insert a plug in the end of the refill.
Reinstall the mechanism, then drop in the refill, put the spring on it, and screw on the new tip.

A video showing how to trim the refill is coming soon!

The trimming tool is adjustable and yours to keep, so you can trim every replacement EnerGel refill you buy down the road.
Bonus: it also trims partially used EnerGel and G2 refills down to length for the G2 TiBolt and the G2 TiCkler. Just run the matching tip on the pen for whichever refill you're using. The G2 TiCkler does not require a bushing change.

Made in the USA, right here in our shop in Hazlehurst, Mississippi.