Frikky – Friction Folder with Bottle Opener – Work In Progress (Part 4)

I’m back at it. My goods showed up, so I can get to work.

Here’s what I was waiting on.

1/8" pins, and 2-56 screws

Since I am only holding this to my fixture with 1/8″ pins, and 2-56 screws, I decided to grind off the bulk of the extra material from my handle slabs.

Here’s laying out the profile with a sharpie.<

Laying out profile with sharpie

And here they are, all ground, and ready to get machined.

Ground, and ready to get machined

Drilling the stop pins.

Getting ready to mill the perimeter

Getting ready to mill the perimeter

Milling the perimeter of the handles.

Counter-boring the pivot.

Counterboring the pivot

All done machining.

All done machining the knife handles
All done machining the knife handles